1D concrete member design improvement
In this version of SCIA ENGINEER 19.1, the design of 1D members has been improved to make the design even smoother and easier than before. Thanks to our Overall check commands, now the user has the possibility to check all the selected members for ULS+SLS in one click.
|Run the ULS + SLS checks in one click|
|Automatic SLS combination generator|
New command for overall check:
The idea from adding this new command is to let the user run all the required/selected ULS/SLS checks in one click.
1. The user has to select the right combination/ class.
Based on this selection,
• The user can select only ULS combination/class and in this case, he will be able to select only the ULS checks.
• The user can select only SLS combination/class and in this case, he will be able to select only the SLS checks. With this option, the user can get the benefit or our smart combinator which will generate all the required SLS combination in the background and use them inside the checks when necessary. So, it does not matter which SLS combinations you generate first.
• The user can select ULS+SLS class and in this case, he will be able to select only the all the ULS and the SLS checks.
Advantages of the new commands:
1. Run all the checks in one click: useful when you want to do a preliminary design and you want to be sure that the assumed reinforcement is correct.
2. Get a quick insight into the ULS/SLS checks. In one click, the user can go directly to the problems without the need to wait running the checks one after one.
3. Save the time from the first run. If the user runs all the checks via the commands of overall checks, then he will get immediate results if he/she runs the individual check for the same combination afterword.